Pillows of yarn with knitting needles and crochet - how to knit a pillow? Knitted pillows with knitting needles and crochet with patterns and description

Pillowcases for decorative pillows can be sewn, tied with your own hands. Then fill with vatin and a pillow will come out. A knitted pillow is no worse than stores, and sometimes better, because it will be difficult to find identical. In this article you will learn how to tie pillows with crochet or knitting needles. Different schemes for creating products will be presented.

Contents

You can’t do without a pillow in the house. It is a mandatory subject for sleep and not only. Small pillows in beautiful pillowcases are a nice decor for a sofa or bed in a bedroom. And if the pillowcase is connected by knitting needles, crochet, then it will still warm in a cool room due to heat transfer.

DIY knitted pillow will be better purchased. Moreover, it can be designed in the form of a heart or star, connected with a pattern, which you like and no one else like. But beginner needlewomen are best studied on simple patterns and forms of products. When you already fill your hand, you can move on to difficult.

A pillow tied - schemes, description

Knitted pillow with knitting needles looks neat and unusual. If you only study the practice of knitting, then knit the product with simple patterns, such as facial surface, elastic band, confusion, chess, rice. In these patterns, only facial and wrong loops alternate. And knitting a pillow is better rectangular or square to start. In any case, the pillowcase of such a cut is knitted as a rectangle, then it folds in half, there is still a place for the bend so that part of the back side will overlap and fasten the zipper or on the buttons.

Pillows with knitting needles and hook

Pillows with voluminous popcorn -A rather interesting example for knitting:

Examples of pillows connected by the Popcorn or cones are presented above, in order to get such a 3-D drawing, three of them are made from one loop at once, and after four rows they make an decrease. These cones should be evenly distributed by a row, i.e. Do through the same number of loops.

Products, knitted by zigzag: look beautiful:

Description - drawing, zigzag, rapport:

Dial the number of loops that is divided into nine + two hem. From the first to the fourth row, knit all the loops only facial.
In the fifth row, too, knit the front, in this way: knit 2lits.p. Together, 2litz.p., as usual, from 1 lits. knit 7, 2lits.p. and 2lits.p. One.
Ambulance: 6th, 8th, 10th: output
In the seventh row, knit: 2lits.p. one, 9 persons, 2lits.p. One.
In the ninth: 2lits.p., 7litz.p., 2lits.p. One.

So knit all the time until you tie the whole product.

Pillow with pattern of openwork leaves It looks fresh and pretty on the knitting needles. The leaves can be laid in a checkerboard pattern or at the edges, or in the middle of the pillow.

The process of knitting openwork leaves is reduced to the following actions:

The number of loops on the knitting needles gain a multiple of 25. Knit all even rows.
In the front row, knit as follows: from the 1st to the 5th, knit persons. Person, the next two persons, persons, persons, two persons, 9th, 11th, 13- I, the 15th, 17th persons, and the 10th, 12th, 14th, 16th are all crochet. 2 loops knit the 1st, persons, two loops of the 1st, from the 21st to the 25th, knit persons. P.
In the third row from the 1st on the 4th persons, knit two people, persons, again two 1st. After even: 8th, 10th, 12th, 14th, 16th and 18th-persons, and 9th, 11th, 15th and 17th-Nakids . After two, knit the 1st, and from the 22nd to the 25th, knit faces.
In the fifth row: from the 1st on the 3rd persons., Two knit the 1st, persons, two 1st. Loops 7th, 9th, 11th-15th, 17th and 19th-all persons, and 8th, 10th, 16th, 18th-all crochet . Two 1st, persons, two 1st, from 23 to 25th-persons.
In the seventh row from the 1st to the 2nd person, the 6th, 8th, from the 10th to the 16th, 18th, 20th-persons, and 7th, 9th , 17th, 19th with crochet. Two knit one, persons, after two 1st. And 24, 25th persons.

Please note that the cover on the pillow should not be knitted from thorny threads. It is better for knitting to use an acrylic thread with a small content of other threads.

A yarn pillow tied in a hook in the form of a star - a scheme, description

The knitted pillow will decorate the interior, and it can be crochet in just a few evenings. A pillow in the shape of a star can also be a great gift. It will be especially pleasant to get her for the holidays for a child or girls. You can tie it from acrylic yarn.

For the process you will need:

yarn of the corresponding color
hook suitable in size to threads

Designations:

S.ST - connecting posts
V.P. - Air loops
SSN - crochet columns.

Subtleties of knitting:

The number of rows directly depends on the thickness of the thread, the thicker the thread, the less rows will be needed. If you want to combine colors, use threads of the same thickness so that the product looks harmonious.
3VP is knitted all the time at the beginning of the new row, we can consider it as SS1N.
The last columns in the row are knitted in the same column as the VP.
If you knit columns in the center, then parts of the product are twisted. Therefore, the product will have to be straightened.
All the rays of the stars are knitted the same. At the beginning of the row, 3VP is knitted. Then knit, reducing rows.
In order not to have rashes, a boot is used as a filler.

Below see the photo how to start knitting a star.

The process of knitting pillow-stars:

Start with the central part. It will consist of two parts.

Start the process with a chain of loops. 3VP, after 9ss1n, make SS in the third initial column.
In the second row: 3VP, 2SS1N, SS1N and SS in the 3rd VP.
In the third row: again knit 3VP, 1ss1N, 2ss1n, make the columns nine times. Then 1ss1N, 1ss1N, attach these columns in 3 columns at the beginning.
In the fourth row 3VP, 1ss1N, 2SS1N, repeat the knitting of columns nine times. Knit 1ss1n, 1ss1n and SS in the initial VP.
In the fifth row 3VP, after nine times, knit 1ss1n, 2ss1n. After 1ss1n, 1ss1n.
In the sixth row, knit 3VP, knit 1ss1N, 2ss1n nine times and tie the SS.
Now knit a stars ray for this, dial 1ss1n, so knit SS1N.
Turn the canvas, knit SS, 3VP, nine pieces of SS1N.
SS, 3VP, seven pieces SS1N. Turn the canvas over.
SS, 3VP, five pieces SS1N, turn the panel over.
SS, 3VP, three SS1N, coup.
SS, 3VP, 1ss1N three times. Turn knitting.
SS, 3VP, 1ss1N, after you can cut the yarn. Gently season the ends of the thread.
In the same method, knit all the other ends of the stars.

Row 6: SOD.S. In the 2nd loop from the hook. 3 V.P. (Consider the first stitch). Make 1ss1n in that loop that 3 V.P. 1ss1n in the next loop. Cut the yarn and fix the ends.

It remains to arrange the edging of the pillow. To do this, start knitting with the SS. After knit another 13ss, starting from the main part of the beam of the cushion. So tie each ray on both sides. Then collect the pillow, place the filler inside, and then sew two parts of knitted stars.

How to knit a pillow - a heart from Alisa Puffy?

A beautiful knitted pillow will come from Puffi yarn. Very beautiful and original if it is connected in the form of a heart. Such a product can be tied to a beloved for Valentine's Day. It is celebrated on February 14th.

For knitting, you need:

Yarn is bright red
Scissors
A hook of a suitable size

Process:

Type VP, stretch six columns into it. Just alternate them - odd in one direction, even in the other.
Further in each loop, take two columns already.
In one column, knit two, in the next one, the total will come out eighteen.
After knit without changes.
The next row is knitted like this: one addition and five columns, repeat it three times. 21 columns will come out.

After remove the thread, leave six loops, one open. One cup of heart will come out, knit the second side according to a similar scheme. It remains to knit 17 columns around one and second upper heart.

Then continue to knit the columns around:

Knit seven poles., Reduce the loops with the following method: 2 column. Stitch 1, stretch 1 pole. With a working thread. 10 stb will decrease. Total will remain 32.
In the next row, reduce the columns again, in the end it turns out that you have reduced 9 pieces, there will be 30 pcs left.
In each subsequent, reduce two columns, until it turns out 26.
In the next row, decrease the columns so that it will be 22.
In the twelfth, reduce to 18 columns.
Knit the second part of the pillowcase in the same way.

Sew after these details. Leave a small gap through which you can fill the pillow with a synthetic winterizer. Cut the thread, season it so that it is not visible.

As you can see, knitting such a pillowcase, or rather, the outer shell of the pillow, will not take much time. And the result will turn out to be unique. The heart pillow will be a beautiful interior item.

How to tie pillows of different shapes - schemes, examples of patterns

Covers for pillows, connected by personally, are one -sided. It is enough to tie the front part, the back can simply be sewn on a sewing machine. But this will not be discussed. Then various examples will be presented for the implementation of patterns that are applicable in practice. The knitted pillow of any of these patterns - crochet or knitting needles, looks original and unique. What drawings to choose, you decide. Knitting patterns are simple and understandable: