Skirt half a sun on the elastic band and without - what fabrics to choose, what measurements to make? Skirt half -sun: pattern, calculation. Skirt half -sun with one seam - how to sew?

It is not so difficult to find and sew a fifth -one skirt. In this article we learn how to sew the product with our own hands. Moreover, this model has many advantages. The skirt is a half -one and the young girls and older women are going on. And it is easy to cut it and sew. Further in detail.

Contents

Such skirts will never go out of fashion. They sit perfectly on a female figure, hide some shortcomings. Even a novice needlewoman can sew a half -dead on an elastic band. The pattern diagram can be drawn in just half an hour. It’s easy to figure it out. Moreover, there are many types of such products. You can choose a skirt for yourself that will be interesting to you, and use various fabrics for sewing. In addition, the fifty -sized skirt is comfortable in sock, it can be worn for shopping and in the office.

Skirt half a sun on the elastic band and without - what fabrics to choose, what measurements to make?

If you correctly build the pattern of the fifty -sized skirt pattern, then sewing the finished product will not be difficult. The fifth -one skirt on the elastic band is perfect for both the summer season and for the fall. There are only subtleties in choosing a material for sewing the product. The wishes of the fashionista should be taken into account. If you wear a skirt in the fall, then you should choose the fabrics of the warmer.

And when you make a product pattern, take into account your parameters. It is precisely these subtleties that will be discussed further before we start studying the pattern of the pattern and sewing the fifty -tone skirt.

The fifth -one skirt can be of different lengths. She has the same cut both in front and behind.

There are many types of products:

The skirt is single -haired, most often the seam is made from behind.
The skirt is a two -sewer.
A skirt with a knee-high length, above the knee or maxi-model.
The top of the product can be sewn in the form of a belt, on a yoke and an elastic band. When constructing a pattern-scheme, these features should be taken into account.
You can also sew a fifth -one skirt with a cut or two, with tucks at the waist or with folds, or you can make a flat panel.

Select fabric for a skirtsimply, taking into account its properties. Too dense materials for the skirt are undesirable, because as the finished product will hang with heavy gross phalda when walking. And very thin fabrics tend to wrap their legs and get confused. It is better to choose drape, viscose, linen, dense silk materials. Artificial suede, polyester, taffeta, crepe-zhorget, tulle, but in several layers are also suitable.

To build the main pattern, you will need to make some measurements, namely:

Waist - It is this measurement that has a dominant value when constructing a diagram. Make a measurement along the thinnest line in the waist area.
The volume of the hips- A centimeter tape is placed in the area of \u200b\u200bthe hips.
The length of the product - measured from the waist line to the estimated length of the product.

Skirt half a sun with a beautiful pattern on fabric

Note: In the classic performance, the skirt is cut so that the shared thread on the material is under ∠45ºС to the center of the product. Thanks to this location, uniform phalda is subsequently formed on the skirt. The seam can be made, both one and two. It is excellent if you evenly and symmetrically distribute the picture on the surface of the skirt. Even when transferring the scheme to the skirt, allowances to the seams should be taken into account.

Skirt half -ton with two seams - pattern, calculation

Skirt half -ton on the elastic band will go to all girls and women. The only thing you are to use soft draped materials, then such models are perfectly sitting on thin women and on full ones. When a woman has narrow hips, a skirt of lungs, flying fabrics will more effectively emphasize her figure. It is better not to choose the peppers for the product with large, floral and geometric patterns.

Counting the fabric for a skirt with two seams is necessary according to the following schemes:

TT \u003d 0.64 × sweat, where TT is the size of the waist on the pattern (see the picture below), sweat - 1/2 sizes along the waist line.
TN - T1N1 is the length of products (di). The construction occurs as in the figure below. First, it is drawn from the point on the line at an angle of 90 degrees. Then draw two circles TT1 and HN1 with a center at the point of O.
The T1T line should be raised by a measured value of T2T3 \u003d 1.75 centimeters. And the value of the segment H3N2 \u003d 3.4 centimeters. The width of the bottom line can be removed 2-7 centimeters from the points H and H1.

For clarity, let's build a scheme of a half-soldier skirt for a size of 76 in the waist and 60 centimeters in length.

Build a right angle with a top at point O. Now you should draw two half -rings with a center at point O. one will cross the lines at points H, H1, H3, the other at points T, T1, T2.
The radius of the second circle passing through points H, H1, H3 will be 0.32 • 76, where 0.32 is a constant value, which indicates a bend on the waist line. As a result, the value of it \u003d 24.3 centimeters.
The first circle passing through points H, H1, H3, it \u003d from + di + 2, where DI is the length of the product. Total it \u003d 86.3 centimeters.
Now it remains to raise the T2 point by 1.75 centimeters, and the bottom line by 3 centimeters.

IMPORTANT: If the skirt is a half -sun on an elastic band, then the waist will have to be increased by a quarter of the waist. When you transfer the pattern to the fabric, you can lay out the diagram across or by oblique. See that the fabric pattern is located symmetrically on the panel of the skirt. And when the width of matter allows you to immediately place two cut parts on the panel, the skirt will turn out with just one seam.

How to cut a drawing on the material?

Consider the width of the fabric. If the fabric is not wide, then make a fifth -one with two panels, with two side seams. If the pattern on the fabric is large, then it should be adjusted so that there are no discrepancies on the side seams.

The threads on the material directly affect the formation of the phalda. Well, the phaldes on a skirt with the seams look evenly if they are cut along the oblique. Details of the cut on paper, as a rule, are drawn without taking into account allowances on the seams. By transferring them to the material, the allowances should be taken into account. So at the waist, about 1.3 centimeters should be added, and on the sides 1.8, below 1.8 centimeters.

Scheme of cutting the skirt in the fabric

How to sew a product step by step master class:

After cutting your skirt on the material, sew and process the side seams. Since our skirt is a half -sun on an elastic band, there will be no lightning. She, so it will be easy to put on the waist.
Take a special wide elastic band on top and sew it to the waist. The width of the waist should be a little removed by stitching the product along the upper line with a large stitch, and evenly pulling it off. The elastic band should be stretched and sewn to the top of the skirt.
All seams should be ironed with an iron so that they become perfect. If the fabric for the product is loose and loose, then glue it with a special strip with an adhesive base.
Next, carry out adjustment of the bottom line. To do this, it is better to use a mannequin or make fitting on the owner of a fashionable bow. The bottom is equal to the floor, or rather, the distance between the lower line of the skirt and the floor is measured with a centimeter, and the skirt circumference is adjusted with scissors.
The bottom can be borrowed in such ways that are interesting to you and approach your model in a half -sun. You can sew a edging, lace strips, chop, or flash the bottom with a zigzag. Then smooth the entire product.

Attention! If you made cut skirts on the fabric along a scythe, then the product after sewing must be given time to ensure that the fibers of the material stretch out somewhat and the skirt takes on its natural appearance. To do this, use small “weights” (bags with something like a bulk weighing about 70 grams). They are hanged evenly along the entire circle of the bottom of the product. It is advisable to sew them every seven to ten centimeters. You can also wet the product in cold water, and let it drain and dry on the mannequin.

How to sew a half -sun with one seam?

Now in the wardrobe of women there are often trousers and jeans, it would still be so comfortable in them. But in skirts, the girls look much more interesting, since it is this wardrobe item that emphasizes femininity. Next, we consider how to sew a fifth -one skirt with one seam from behind. Such a new thing can definitely become a favorite thing.

Moreover, it has a number of advantages, such as very convenient, you will not feel stiffness in motion, because the thing has a free cut. You can diversify the styles and use different fabrics. A skirt of this species reduces visually the volume of the waist and increases the volume of the chest. You can make such an element of wardrobe from different fabrics and do not need additional drawings, complex patterns.
For sewing a single -haired skirt, prepare the following:

Material for inexperienced seamstresses is better to use plain tissues
Thimble, needle, sewing machine, threads
Auxiliary elements in the form of materials for processing the bottom, zipper, chalk, paper for the circuit, pencil, chalk, ruler, centimeter.

Fabrics will need about 2.2 meters with a width of 1.8. True, a lot depends on the length of the product, if the skirt is mini, then the fabric will need less. The pattern of the pattern, which is the same for a two -shirt, which for a single -seal. The only thing that the fabric should be bent in two on the side seam to get a single -haired product. The pattern and calculations scheme are given in the previous paragraph, it remains only to transfer this scheme to the fabric.

How to sew a fifth -one skirt with one seam from behind?

Those who already have experience in sewing products will be able to apply a cut diagram directly to the fabric. The only thing that do not make mistakes with the calculations and correctly make measurements of your parameters. And also do not forget that it is necessary to make allowances for seams of 1.4-2 centimeters.
After manually outline the seam and sew the zipper. Debt the seams. If everything turned out beautifully and evenly, then make a line and process the edges.
Collect the line of the top of the product to the required size, then sew the belt to it, put the zipper exactly to the skirt.
Sew a button and make a neat loop for her.
The bottom of the product is fastened with ribbons, you can also simply treat with a zigzag or sew a lace ribbon.

Another detail - for a one -sewing skirt, it is better not to buy fabric with a pile. The thing should seem light, and the phaldes are beautifully emphasized by the product. Rough materials will “steal” the entire charm of things.

Skirt half -sun - photo

Next, see examples of ready-made models of such a cut, maybe you will like something and you will sew just such a skirt. Or make your changes, the option will come out even better. Your Skirt Pole Solnz will delight others.