Knitting schemes for hats and cap for newborns: step-by-step master classes-women's tips

We knit a hat for a newborn with knitting needles: master classes, photos, videos, ideas

Contents

For those who like to knit and want to create a unique unique product for a newborn, we have collected in one place many options for hats and caps for newborn knitting needles. In the article you will learn which yarn is better to choose, how to calculate the density of knitting and other subtleties of knitting hats for babies.

How to tie a hat for a newborn: model elf

The most popular model for a newborn elf conquered the open spaces of social networks in recent years, and does not leave the peak of popularity. And that’s all, because it combines a unique design, simplicity of execution, as well as maximum comfort for the baby.

For knitting the caps are recommended bBB Full yarnor any other delicate children's yarn with a thickness of 170-190 m in 100 g on the hat takes about 60-75 g, therefore, when buying woolen threads BBB Full, 2 skeins are consumed.

A step-by-step scheme how to tie a hat for a newborn with an average head volume 38-40 cm (0-3 months):

To tie a tiny product for small treasures of BBB Full yarn, knitting needles No. 4-4.5 are recommended. To work on size 38-40 (this product is very elastic and will be worn to the size of 44-46 for sure) we dial 60 loops + 2 chomic loops (when knitting a larger product, add the number of loops a multiple 4. For example, 66-70 and t. d. Calculation is simple: the number of loops is multiple 4 + 2 pcs at the beginning and end of the row);
1 row - This is a series in which loops are distributed for further knitting. Please note that knitting should begin with the ingrown and facial loops, and end with the front and only hem. Thus, in the middle of the canvas there will be two facial loops. We knit according to this scheme: we remove the bromic, facial loop, 2 wrong loops and further along the pattern with an elastic band 2*2, the last loop is the bromic (always the wrong side);
After that, we knit 3 rows along the pattern without changes;
On the 5th row We begin to knit a horizontal elastic band: remove the bromic, 5 facial loops, then on the pattern until 6 loops are left on the knitting needle. Of these, 5 faces, the last bromic side;
6 row wrong: We remove the hem, 5 wrong ones, then on the pattern until 6 loops are left on the knitting needle. Of these, we knit 5 wrong and the last bromic is also the wrong side;
7 row faces: Remove the hem, 5 facial loops, then along the pattern until 6 loops are left on the knitting needle. Of these, 5 faces, the last bromic side;
The 8th row is wrong: Imark, 7 facial, there are no 8 loops left on the knitting pattern, of which 7 facials are, and the last bromic;
2 rows of pattern without changes, and this cycle will be repeated before the top of the top of the head is knitted;
11 row: We remove the only to knit the bromic, 9 facial loops, along the pattern, until there are 10 loops left on the knitting needle, of which 9 facial loops and the last bromic side;
2 rows by the pattern without changes;
14 row: We remove the bromic without knitting, 11 facials, along the pattern, until 12 loops remain on the knitting needle, of which 11 facial loops and the last bromic side;
2 rows by the pattern without changes;
In the 17th row: We remove the bromic without knitting, 13 facial loops, then along the pattern, until there are 14 loops left on the knitting needle, of which 13 facial and the last hem;
2 rows by the pattern without changes;
In the 20th row: Sickle, 15 facial, along the pattern, until 16 loops remain on the knitting needle, of which 15 faces and the last hem;
2 rows by the pattern without changes;
23 row: Imill, 17 facial, according to the pattern, until 18 loops are left on the knitting needle, of which 17 are facial and the last hem;
2 rows by the pattern without changes;
26 row: Imark, 19 facial, according to the pattern, until 20 loops are left on the knitting needle, of which 19 faces and the last hem;
2 rows of pattern without changingth;
So we knit, while in the middle of the gum 2*2, 2 facial loops are left, and we begin the reduction. The thread goes at work. We knit the front, unfold the loops to lie carefully and reduce 2 in 1 loop, unfold knitting;
On the wrong row, the thread goes before knitting. We remove the wrong loop (which we reduced on the front row, and the next two loops are reduced 2 in 1 wrong loop). We unfold knitting;
We knit this way until we close all the loops on the hat;
On the edge, we make a set of loops multiple 2 and knit an elastic band 2*2: hem, front, 2 wrong, 2 front, etc. by the pattern;
We knit 3 cm of the height of the bar and close the elastic edge with a gypsy needle;
We collect 3 loops on the sock knitting needles. Tighten knitting on the right edge and tug the thread to the beginning of work. We knit 3 facials, and again we pull the thread to the beginning of knitting and knit a new row from 3 front. Thus, we get a lace. We knit 15 cm, close 3 in 1 and tighten the thread;
Sew the laces to the cap and tighten the tips of the threads. Elphic is ready!

Video: "Elf" - a hat with knitting needles. 4 sizes-0-3, 3-6, 6-9, 9-12 months

Newborn cap connected by knitting needles: model with node

So, we suggest tie a cheerful and cute hat for a newborn with a node. The model is not intended for the street, but more like a hat for a photo shoot or for insulation in cool rooms, since it is not tightly fixed on the head and the ears can open when moving the head.

How to tie a hat for a newborn with knitting needles with a node:

Any children's threads, both cotton and acrylic, merino wool are suitable. We knit a sample of 10 loops in 5 rows to determine how many loops are needed. It is better to knit a hat for a newborn without a seam, and for this you will need sock knitting needles (5 pcs);
The volume of the newborn head is 36-40 cm + 1 cm for free fit. We make the calculation of the loops in this way: we consider the required number of loops according to the model and adjust to the multiplicity of 4;
We make a set of loops (we have 40) + 1 loop for the connection. Total collect 41 loops;
We knit a row with facial loops distributing the same number of loops on the knitting needles (we have 10 loops each);
The last loop is also knitted with the front, and the first hem of which was removed, we throw on the latter connecting the row;
We knit 3 cm with facial, after which we knit 2 rows with an elastic band 1*1 (so that the edge does not roll further and a neat side will be obtained);
Again we knit the entire depth of the cap with facial loops in a circle (10 cm);
We begin reductions: the first and second loops on each spoke we knit together reducing the circumference of the cap;
We knit the next row without abbreviations;
We reduce the new row again and so on until 4 loops remain on the knitting needles;
We knit the “tail” 10 cm and close the loops, tightening the thread;
We tie the threads, tie the tail and the cap is ready!

Video: hat hat with knitting needles. Children's cap. A hat for a newborn. A detailed master class.

A cap for a newborn boy connected by knitting needles: Model Pinocchio

And in this section we propose to connect a cheerful and perky hat for the newborn boy Pinocchio. Two types of contrasting threads will be used in the model: white and blue, red, etc. To choose from. In the famous film adaptation, Pinocchio has a red-white cap, but now models with a blue and blue strip are popular.

Hat for baby Pinocchio — Hat for the baby "Pinocchio"

How to tie a hat for a newborn with knitting needles - "Pinocchio":

We select the yarn of the same density and thickness, perfectly - one brand, otherwise the cap will be uneven. We knit an example of one of the types of thread and make a calculation for the volume of the head 40 cm;
We collect the required number of loops a multiple of 2 on the sock knitting needles (5 pcs) (since we will knit an elastic band). We have 60 loops + one for the connection;
The first row we knit an elastic band 1*1 and at the same time distribute the loops for 4 knitting needles. We have 15 loops for each knitting needle;
We knit the last loop along the pattern and transfer the first hem loop to the latter forming a circle;
3 cm we knit with one yarn;
We go to a new color and at the same time begin to knit with facial loops. Then we knit a hat exclusively with facial loops;
We knit 4 rows of white yarn and again change the color. There is no need to break off the thread - do the broach, which can then be bent with ordinary sewing thread No. 40;
After 4 rows, we again change the thread to a contrasting one, and so we knit 10cm;
We begin the reduction: we knit 1-2 loops together on each knitting needle;
We knit 5 rows, and on the 6th row we repeat the reduction. Thanks to this, the reduction is gradually going on and the cap of the necessary shape is obtained;
When on the knitting needles it remains 8 loops to knit another 2-3 cm and tighten, closing the loops;
Make a multi -colored pompom and sew on a hat;
Tighten the ends of the yarn, pick up the broaches and the cap is ready!

Video: a cap-cap with knitting needles for a photo shoot. Baby hat from 6 to 9 months. A hat for newborns.

Cap for a newborn knitting

In this section, we propose to bind a cap for a newborn with knitting needles. The model is very simple and suitable even for knitting by beginners. In order to understand what the finished canvas will look like - check out the capture's scheme.

Cap for a newborn with knitting needles: Scheme

Where the set of loops will be along the line (direct AB).

How to tie a hat for a newborn in the form of a cap:

We knit a sample: We collect 16 loops and knit the pattern. 2 rows with facial, 3 row: hem, 3 facial loops, cloak, two together faces, 2 facial, crochet, two together, and so on until the end of the row. 4 row: wrong. 5 row: Imark, 1 front, cloak, two front, 2 front, cloak and so on until the end of the row. The wrong side is always the wrong loops. Knit 5-7 rows and calculate the density of knitting;
To make a calculation where a single formula is suitable for a set of loops: the floor gap * 1.5 + 6 cm. Total, for a head of the head 38 cm, this calculation will be obtained: 1.5 * 19 + 6 \u003d 34.5 cm. Next, we calculate the density of knitting. If 1 cm 4 hinges, then 34.5*4+2 hem loops \u003d 140 loops. If the number is not multiple, we round to the near future to multiplicity;
Now go to knitting. We type the required number of loops and knit the bar with a width of 3 cm with a patch with a width (all rows of the front);
We go to the main part of the knitting. We knit 11 cm with a pattern (width AA1);
Divide the loops into 3 parts (140/3 \u003d 46+2 hem). We start decreases as in the sock heel. Remove the 1st hem. We knit 1/3 where we leave 1 loop, we knit it along with the first loops of the middle part and then we knit 2/3 with the faces, leaving the last loop from this part and knit the first loop 3/3 of the part together, we knit another loop and unfold knitting;
The inside with the wrong loops to the end of the wedge + 1 loop from 1/3 of the part;
We knit 2 in 1 and further facing to the end of the wedge, where we reduce again;
Having knitted the back of the head completely, we again knit the bar 3 cm with a prying bastard;
We knit the laces ties and sew it to the cap;
We fill the threads and the cap is ready!

Video: How to knit a hat to a newborn?

Hats and caps for a newborn with knitting needles: photo

Above, we have brought the main knitting schemes for hats and caps for newborns. But asking the question of how to tie a hat for a newborn, they are also interested in interesting ideas for embodiment. In this section for experienced knitters, we leave fashionable and creative ideas for embodiment.

Video: hat to the baby with knitting needles with ears and ties

Hats and caps for a newborn with knitting needles: reviews

Anastasia: I learned to knit at school, but during pregnancy this idea captured me again. And my first work is an elf cap. I tried on a large doll - it looks gorgeous! And the merino wool is both warm and delicate, ideal for the baby's delicate skin. I recommend to everyone!

Yana: I tied all my three children, but time goes on and the models have become irrelevant. The daughter -in -law dropped several ideas, and I tied her with a cap with hare ears, elphas and the sweetest Pinocchio. And she is delighted, and I already tied three hats for the first granddaughter whom I adore! I recommend to take cotton, Baby-Acril and merino wool, as if created for the most delicate skin of a newborn!

Do you like knitting? Our articles will be useful to you: