Ways to hang a mirror without drilling, using glue, adhesive tape, fasteners.
Contents
- How to hang a mirror on the wall in the hallway using dowels and screws: Instructions
- How to fix a mirror on a wall with a frame?
- How to fix the mirror on the wall without a frame: instructions, fasteners
- How to hang a mirror without drilling?
- How to hang a mirror on a wall without drilling on adhesive tape?
- How to hang a mirror on the entire wall?
- Video: How to hang a mirror?
A mirror is an object that significantly increases the space in the room, so it can make it visually larger. Usually, designers often use this technique to visually increase the space and make it more spacious. In this article we will tell you how to attach a mirror to the wall.
How to hang a mirror on the wall in the hallway using dowels and screws: Instructions
The fastener option is selected depending on the characteristics of the accessory itself, as well as on the surface on which it will be attached. Of course, the easiest way to fix items with frames, because with their help you can hide some fasteners.
Instructions:
- To hang a mirror on the wall in the hallway, h moreover, the loops are usually screwed onto the surface of the frame, and a dowel or self -tapping screw is screwed into the wall. The method of attaching a screw or dowel depends on the surface. If it is drywall, then it is enough to use just a screwdriver, as well as the self -tapping screw itself.
- If the concrete wall, then it is necessary to drill the hole of the desired diameter, fill it with wooden contents, a small cylinder made of wood is suitable. After that, you need to screw a screw or dowel.
- You can use self -tapping screws with special plastic cups, into which the screw is later screwed. This is quite simple, and the most famous, common option.
How to fix a mirror on a wall with a frame?
How to fix the mirror on the wall without a frame: instructions, fasteners
However, the option is not suitable if necessaryfix the mirror on the wall without a frame. Thus, the problem appears, how to imperceptibly equip these fasteners.
Instructions:
- Most often, there are special legs for attaching mirrors in the bathroom that do not have a framework. They usually screw into the wall with dowels or screws. If the wall is concrete, then it is necessary to pre -drill a hole using a drill.
- Next, a plastic cup is attached into which the fastener element is screwed. Before that, the paw is put on the screw and fixed in a certain position. Most often, such paws are made from above and below, they play the role of brackets, and fix the mirror in a fixed position.
- Another way with drilling holes in the mirror itself. Instructions in the picture.
However, this option is sometimes not acceptable, especially if there is no drill, perforator and there is nothing to drill holes. In this case, other, more progressive and modern methods are suitable.
How to hang a mirror without drilling?
Such methods include special glue for mirrors. It is sold in tubes with a removable nose. The principle of operation is the same as the mounting foam. It is necessary to screw the nose to the lid, and put on the syringe-pistol.
Instructions:
- That is, it works with a pistol. Next, the surface of the mirror is degreased with alcohol and wiped dry. In this case, special attention must be paid to the cleanliness of the wall. After all, it is best to glue on a wall where there is no decorative coating, that is, wallpaper. You can tightly glue the accessory to the wall tightly, but the wallpaper will be poorly fixed and fall off with the mirror.
- Accordingly, we advise you in the places where you are going to glue the mirror, cut the wallpaper. Next, you need to pay a lot of attention to surface cleaning. It must be washed with a damp cloth, as well as apply a primer, if possible, if the wall is concrete, is without coating.
- Further, in a chaotic manner, glue is applied to a clean and low -fat mirror. This is usually done throughout the mirror area, from top to bottom. In this case, the distance between the clots of the glue should be no more than 10 cm.
- Next, the mirror is tightly pressed to the surface, you need to wait for the drying. If you want to attach the mirror in this way to the wardrobe door, then it is best to remove it first. Indeed, in a horizontal position, the mirror dries faster and better, while the possibility of crookedly and unevenly glue the mirror.
- Before as hang a mirror without drilling, it is best to make preliminary markings with a pencil. This will allow you to attach the accessory as evenly and accurately as possible. But as you can see, this method has disadvantages, because you can ruin the wallpaper. If you are going to move soon, or the apartment is removable, then such methods are not very suitable for fastening mirrors.
How to hang a mirror on a wall without drilling on adhesive tape?
You can alsohang a mirror on adhesive tape. In this case, the mount is carried out using ordinary bilateral, mounting adhesive tape. We advise you to choose a product that is made of polypropylene and is soft. Thus, it will be possible to avoid small irregularities of the wall. Do not choose a flat, thin tape.
Instructions:
- Next, it is necessary to clean the surface with a degreaser, and remove the tape from one part. Try to do this not at the same time, you need to remove the tape not completely, but in small areas, gradually gluing to the surface.
- It is necessary to place two horizontal stripes from above and below. Further, vertically, you can also glue this tape, but in small pieces, at a distance of 10 cm from each other. After that, it is necessary to prepare the wall and degrease it.
- The most interesting thing is that bilateral tape holds perfectly on the wallpaper. After that, the second layer is removed with a sticky tape, and tightly pressed against the wall. Please note that the glue is quite well glued to the wallpaper and concrete walls, as well as to the surfaces of drywall.
- After that, it is necessary to initially note where the mirror will be. That is, the upper and lower part. This will allow you to attach the mirror as even as possible. After all, if the adhesive tape sticks to the wall, it will be quite difficult to tear off and align the accessory as necessary.
- There is also a mirror with ready -made holes for fasteners. For them, special fasteners are purchased with soft, plastic or rubber hats. This is necessary in order not to damage the mirror and not make chips.
- In this case, you will still have to drill holes in the wall and enter the base for further fastening. Now a soft gasket is put on the fastener element, spread through the hole in the mirror and screwed into the wall. Try not to crush much, and tightly screw the fasteners so that the mirror does not burst, and there are no damage and chips.
How to hang a mirror on the entire wall?
There are special fasteners for mirrors that have overlays and pretty plugs. This will help to additionally decorate the mirror and make the interior exquisite and unusual. If, nevertheless, you want to perform the mirror without drilling, you should pay attention to new fasteners, such as a commander. One part is attached to the mirror, and the second on the wall. At the same time, performing fasteners is quite simple. Please note that this method is not suitable for large mirrors with decent weight. Otherwise, the mirror may fall.
The most difficult thinghang a mirror, which occupies the area of \u200b\u200balmost the entire surface. Typically, such mirrors are divided into several segments that need to be glued one at a time. Please note that there must be a space of several millimeters between the mirrors. Before gluing, such surfaces are covered with a special composition, which will prevent the glass crushing into small pieces, in case of random damage. This is a kind of safety, which allows you to not cut during the appearance of fragments. Thus, all the fragments will remain on the wall and will not fall off from it.
Choose a fastening option depending on the mass of the mirror. This will prevent collapse.