How beautifully tie a bow on a gift box from the tape: schemes, step -by -step instructions, video

The bow is the final stage for a gift box - like a cherry on the cake. The more spectacular the bow, the more original the gift looks.

Contents

For tying a bow, paper, satin, satin ribbon is suitable. For lush bows, it is best to use a wire tape, which will allow you to form the desired shape. To fix the paper tape, you can use tape, for the fabric tape you will need a thermal pistol. In order for the present to acquire a finished look, we propose to master the art of designing the box.

Classic bow on a gift box from the tape

Before wrapping the box with a bow, you need to prepare the base from the packaging paper. For a neat appearance, the joints of the paper are fastened with transparent adhesive tape. The coloring of paper and the strip bow should be combined with each other. In order for a bow from the satin tape to hold the shape well, you can pre -starch the fabric.

How to tie a classic satin tape bow on a gift box:

Cut off a piece of tape for the size of the box. The right length is two full circles around the box.
We wrap the box with a tape in the center. We align the ends of the tape. We cross them together and tie a bow of two loops. We fix the bow with a knot.
Put up the bow loops to stable fixation. Give our hands the desired shape.
For double turning around the box, a tape of a larger length is cut off. A bow made of thin ribbon can be supplemented with a decorative note.

Video: How to tie a classic simple bow?

How to tie a bow on the corner of the box?

In order for the decorative bow to the corner of the box, we adhere to the phased instructions:

The tape turns on the longest side of the box.
The ends start under the bottom, where they cross closer to the side of the box. For example, 3 cm from the edge.
Crossing the ribbons is performed closer to the side of the box, 2-3 cm from the end.
We remove the ribbons to the upper part of the box and tie the bow.
We fix the bow with a knot common to a horizontal and vertical winding.
Cut the excess tail length.

How to tie two bow in different corners of a gift box?

For decoration, you can choose two satin ribbons of different colors. For example, for a gift box wrapped in blue paper, a blue and silver ribbon are suitable.

How to tie two bow on a gift box:

We lay out two parallel ribbons on the table.
On top of the ribbon we put a box obliquely. The corners of the box diagonally intersect with ribbons.
We remove two ribbons of different colors upstairs and cross them together.
We tie on a bow and straighten the ends.
The edges of the fabric ribbons are sealed with a lighter.

Double -haired bow on gift packaging

A bow on a gift box is made of paper tape:

Cut two flat paper of different lengths - the difference 2-3 cm.
We turn two rings, each of which is pressed in the middle.
We apply a small bow above the large bow.
We wrap a small segment of the paper in the middle of the two bows, connecting them into a single whole.
On the wrong side of the center we lay out two ribbons fixed with tape.

Two -color gang of satin tape on a gift box

You will need two ribbons of different thicknesses. For an expressive accessory, select two different shades. For example, olive and silver, pale pink and purple.

Two -color bow for a gift box - step -by -step instructions:

We cut out two segments of the same length. We form 2 bow
Connect the workpiece.
We connect two blanks in the center with a narrow segment of the tape.

Bows from a large number of layers are made by applying segments of different lengths on each other and fixing them in the middle.

Bant Dior for a gift box

The bow on a gift box made of wide satin tape looks spectacular:

We cut off three segments of the tape with a difference of 2-3 cm.
We fasten the ends of each segment into an elongated ring.
From a larger to smaller we lay the bows on each other. The central units should coincide with each other.
We cut off the two segments 3 cm long. From one, twist the ring and glue it with the thermal pistol to the middle of the upper bow down.
The second segment vertically connect the entire structure into a single whole, masking the gluing places of ribbons.

How to make a flower from the tape?

A decorative bow for a gift box is more convenient to make from a paper tape:

A long tape is folded in 4-5 layers according to the principle of eight. Each subsequent layer is shorter than the previous one.
The middle of the multilayer bow is bandaged with a ribbon. We unfold each layer from different angles in relation to each other.

The bow is made in two versions - from puff rings of the same length and twisting layers of different lengths. The bow looks beautiful, the two sides of which are painted in different shades.

Video: A beautiful flower from a tape on a box with a gift

Chrysanthemum bow on a gift box from the tape

For the decor, you will need a dense glossy tape.

We connect several layers of rings to the loops of the same length.
As a fastener of rings, we use a piece of wire.
Along each loop, we perform parallel cuts, withstanding a distance of 3-5 mm.
We straighten the petals in different directions, forming a fluffy chrysanthemum.

A chrysanthemum bow on a gift box from the tape can be performed by bandaging a large number of thin satin ribbons.

Bow's satin tie on a gift box

To make a bow tag for a gift box, you will need two satin ribbons of the same thickness, but in different colors-a combination of dark and light shades. For the tail, you will need a thin ribbon with a shade of one of the main colors.

We cut off two pieces of tape 20 cm.
From the dark tape we form a flat three -layer bow, straightening the layers by a fan. We give the flattened shape using an iron.
From the light tape we form a two -layer bow of smaller diameter. We leave the loops parallel to each other.
With a light ribbon, we connect two bow in one.
From a thin ribbon we cut out a few tails for a bow. We stretch them through the central ring. The ends are cauterized with a lighter.
We tie the bow to the gift box.

Gang from organza for a gift box

To make a simple magnificent bow for a gift box of organza, we harvest a meter narrow tape and a thread with a needle.

On the entire length of the tape, we perform the stitches with a needle-on the one hand, a loop is 5-6 cm, on the other hand, stitches for a couple of mm.

We tighten the beginning and end of the stitched thread with a knot, collecting the tape into a magnificent bow.
Symmetrically, straighten the bow loops and attach it to the gift package.